Search found 78 matches

by llanigraham
Tue Jan 08, 2019 9:58 pm
Forum: Tech Talk
Topic: Fuel pump problems?
Replies: 19
Views: 28790

Re: Fuel pump problems?

I'm sorry but 40 years experience shows me that petrol in a carb DOES evaporate. No carb is totally air tight since there is a tiny hole in the jet otherwise it wouldn't be able to inject fuel into the airstream, plus there is a pipe running from the carb back to the petrol tank, so even that pipe w...
by llanigraham
Sat Jan 05, 2019 6:48 pm
Forum: Tech Talk
Topic: Fuel pump problems?
Replies: 19
Views: 28790

Re: Fuel pump problems?

It might make it start easily, but it's long term use is not good for any engine.
If the engine doesn't start correctly then you would be much better finding and curing the problem properly.
by llanigraham
Fri Jan 04, 2019 10:18 pm
Forum: Tech Talk
Topic: Fuel pump problems?
Replies: 19
Views: 28790

Re: Fuel pump problems?

My fuel pump is new but I find similar symptoms, an evident lack of fuel to the engine after a period of a couple of weeks without running. I recently towed the car on a trailer to Spain and the same problem occurred when I tried to start it. I doubt that evaporation could be the cause - where woul...
by llanigraham
Sat Dec 29, 2018 2:55 pm
Forum: Tech Talk
Topic: Engine change
Replies: 7
Views: 11005

Re: Engine change

There is no-one using that name in the Members list (5th button along the top of the page, under the main title)
by llanigraham
Fri Oct 19, 2018 9:41 pm
Forum: MSVA/IVA
Topic: 224 to 223
Replies: 2
Views: 22453

Re: 224 to 223

It will need to be retested since it is a (very) radical modification.
by llanigraham
Sat Sep 08, 2018 8:24 pm
Forum: Tech Talk
Topic: Fitting a charging light
Replies: 13
Views: 11875

Re: Fitting a charging light

I've got the wiring diagram to make your own version of this LED indicator, and therefore much cheaper.
Unfortunately beyond my abilities to make though.
by llanigraham
Mon Jul 16, 2018 2:02 pm
Forum: Tech Talk
Topic: Oil Filler Breather
Replies: 9
Views: 13927

Re: Oil Filler Breather

I got one last year from someone who was still producing them, but can't find the details.
by llanigraham
Thu Jul 12, 2018 5:26 pm
Forum: Tech Talk
Topic: Electronic ignition
Replies: 10
Views: 21340

Re: Electronic ignition

My Lomax 223 had a Boyer Bransden fitted and ran well. However, have just fitted a Lumenition Optronic system to improve reliability and remove the weak link i.e the contact breaker. Am also using a Boyer Bransden coil which seems to be working well too. It is mounted on the Boyer heat sink which a...
by llanigraham
Mon May 28, 2018 10:43 pm
Forum: Tech Talk
Topic: lomax 223
Replies: 5
Views: 9616

Re: lomax 223

Await the arguements, but from my reading of all the DVSA papers, as far as I can see a 223 can never be exempt from the MOT as it has had the chassis "radically modified".
by llanigraham
Fri Apr 20, 2018 7:56 am
Forum: Tech Talk
Topic: Lomax Factory Windscreen
Replies: 4
Views: 9098

Re: Lomax Factory Windscreen

If it is going back into a channel shaped frame I asked the glass company for some nylon flat spacers and put these in the bottom section so that the glass was held probably 5mm from the bottom of the channel. Then dry fitted the glass to the complete frame to check it fitted. You might also need sp...