Progress

notsmartcar · Post by **notsmartcar** » Fri Jan 20, 2023 6:38 pm

A little more progress.

: DFDC8C7D-5027-4DED-9A0B-3C8F0954218E.jpeg (119.8 KiB) Viewed 21660 times

howardjs · Post by **howardjs** » Sat Jan 21, 2023 1:34 pm

Interesting hub adaptors Kevin, for Smart fore two wheels? Any info...
Howard

notsmartcar · Post by **notsmartcar** » Sat Jan 21, 2023 3:50 pm

Standard fitting on a blackjack avion. From david emery.

. Gives wider track thus tighter turning circle more clearance in some cases for an exhaust pipe

AlanM · Post by **AlanM** » Sun Jan 22, 2023 10:19 am

I like the mudguard mountings Kevin. Did you weld brackets on the uprights or are the king pin swivels from another Citroen 2CV clone?

notsmartcar · Post by **notsmartcar** » Sun Jan 22, 2023 11:15 am

Hi Alan to save time I just bought them hubs with brackets on/fibre glass wings/brackets complete so they fit perfectly from david emery the blackjack avion parts supplier. The ball joints/Trackrod ends from Howard of course and they are brilliant as well

.

AlanM · Post by **AlanM** » Mon Jan 23, 2023 10:17 am

Thanks Kevin

I've got some of Howard's TRE's waiting in the wings.

namster · Post by **namster** » Mon Jan 23, 2023 11:10 pm

Alan,

The Ami had mounts on the front of the swivels for inertia dampers.

On mine I also had some rear mounts made up and welded on too. I made some wing brackets out of some barstock, angle and plate.

AlanM · Post by **AlanM** » Tue Jan 24, 2023 1:29 pm

Thanks Niall

I thought that I had read somewhere that one of the clones had such brackets. It is of interest only at the moment as I have some NOS original brackets that mount on the TRE points. Mind you I have also heard that these are prone to faults. Time will tell.

Citroen Specials Club - the club for all lightweight cyclecars

Progress

Progress

Re: Progress

Re: Progress

Re: Progress

Re: Progress

Re: Progress

Re: Progress

Re: Progress